Contra / Gryzor stereo sound

Gabinetes, PCBs, mantenimiento, etc
Reglas del Foro
Las reglas son muy sencillas. Por favor abstengase de postear acerca de copias piratas, descargas ilegales, enlaces, etc. Lo mismo aplica a material ofensivo, es decir, fuera de contexto o inapropiado.

Todo lo demás está permitido siempre y cuando no se esté ofendiendo a alguien más de manera directa e intencional. Por lo mismo no se permite insultar a otras personas.

Cualquier violación a éste reglamento, resultará en un ban permanente.
Avatar de Usuario
Artemio
Site Admin
Mensajes: 3006
Registrado: Lun Ago 06, 2012 5:04 pm
Cuenta de Twitter: Artemio
Ubicación: México
Contactar:

Contra / Gryzor stereo sound

Mensaje por Artemio »

(English response is below)

Hace algunos años ví este post, y respondí en los comentarios.

http://www.jammarcade.net/contra-gryzor-stereo-sound/

Sin embargo, nunca vi que e habían preguntado un par de cosas, y no respondí hasta hoy. Por desgracia ya no se puede comentar para responder allí, así que haré lo segundo mejor. responder aquí. Tal vez le sirva a alguien que busque respuestas en el futuro.

De momento dejo la documenatción que hice en español:

Opciones de Audio para Contra

Stereo:
  • Poner el conector en CN4, debe tener los cables conectando pin 1 a 3 y pin 2 a 4 (de fábrica viene 1 a 2 y 3 a 4)
  • Poner el switch 4 del DIPSW3 en OFF
  • El audio está amplificado (no meter a otro amplificador) y soporta bocinas de 4 u 8 ohms.
Pinout:
  • Pin 1 Right
  • Pin 2 GND
  • Pin 3 GND
  • Pin 4 Left

Mono:
  • Poner el conector en CN3, debe tener los cables conectando 1 a 2 y 3 a 4 (como viene de fábrica)
  • Poner el switch 4 del DIPSW3 en ON
English:

A few years ago, I read this post. I replied in the comments.

http://www.jammarcade.net/contra-gryzor-stereo-sound/

However back then I didn't notice I was asked back a few things. Since I can no longer reply at jamma arcade's comments section, I rather reply here in hopes that someone that does a search will find this post as well.
Yves M says:
I’ve updated my post with your information. Does the connector on Trigon and Parodius is originally wired like Contra ? (pin #1 wired to #2 and pin #3 wired to #4)
Yes, they are wired like contra 1 to 2 and 3 to 4.
There is a picture online of a Jackal PCB (same game than Top Gunner) with the stereo connector soldered: http://www.tvspels-nostalgi.com/Bilder/ ... al_pcb.jpg
Curious to see if stereo is working with or without modification on that one.
I soldered the connector and tested it. It outputs through the 13 pin connector as the manual states. Pin 1 and Pin 3 have the audio signals, however pin 1 has a DC offset and pin 3 doesn't. Works perfectly in stereo and tested with 4 ohm speakers. Using the factory provided 1 to 2 and 3 to 4 adapter, seems only Contra has the issue.
Responder